Address
304 North Cardinal
St. Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
Address
304 North Cardinal
St. Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM

Custom compact radial heat sink sections with aluminum extrusion, CNC machining, finishing and inspection from HIQ Aluminum.
Send the drawing, material, finish, critical tolerances and estimated quantities. We will confirm the engineering route before quotation.
Request a technical quoteHSP-11477 Compact Radial Heat Sink Sections is a radial-fin extruded heat sink for compact components that need heat spreading around a cylindrical or motor-style envelope. The HSP-11477 reference profile is presented as a starting point for a drawing-led quotation; alloy, dimensions, temper, machining and finish are confirmed for each production programme.

The radial arrangement distributes surface area around the heat source instead of concentrating cooling on one flat side. That layout can suit motor bodies, tubular electronics and compact power modules where the available envelope is round or where cooling must work from several directions. The final section should be evaluated against the component heat load, airflow or coolant arrangement, mounting method, enclosure clearance and the production quantity. Sharing those details allows HIQ to identify the critical surfaces and avoid unnecessary secondary operations.
The profile can be supplied from a suitable existing die or developed as a project-specific extrusion. Production planning can include controlled cutting, CNC milling, drilling, tapping, deburring, cleaning and protective packing. Anodizing or powder coating is selected around the appearance, corrosion and thermal-contact requirements of the installed part.
For the thermal interface, define flatness, surface roughness, contact area and mounting pressure where they affect heat transfer. For enclosure-style sections, define connector openings, sealing surfaces and grounding points before machining. These requirements should appear on the approved drawing rather than being inferred at the end of production.
Inspection can cover profile dimensions, straightness, fin spacing, cut length, machined feature position, surface condition and finish appearance. Sampling and documentation are agreed in the quotation and approval package. Where the part carries a thermal or sealing interface, the control method should be linked to the function of that interface.
Yes. Share the component footprint, heat load, available space, airflow or cooling route, mounting method and target quantity so the extrusion and machining route can be reviewed together.
Cutting, CNC milling, drilling, tapping and other agreed secondary operations can be included with the extrusion. Critical dimensions and inspection expectations should be defined on the approved drawing.
Yes. An existing profile can be assessed for the finished part, but its section, condition and available machining allowance must match the new thermal and mechanical requirements.
Browse the wider aluminum heat sink product range, read the extruded heat sink design guide, or send your thermal drawing to HIQ. For material terminology, see the Aluminum Association.