Address
304 North Cardinal
St. Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
Address
304 North Cardinal
St. Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM

A high-power IGBT liquid cooling plate for concentrated power-module heat loads, with project-specific channel, port, flatness and inspection requirements.
Send the drawing, material, finish, critical tolerances and estimated quantities. We will confirm the engineering route before quotation.
Request a technical quoteHigh power IGBT liquid cooling plate is specified around the complete thermal and mechanical job. A high-power IGBT liquid cooling plate is a thermal and mechanical interface, not only a metal plate with coolant fittings. It must spread heat from one or more switching devices, maintain stable contact pressure and keep the coolant circuit sealed through production and service.
Power modules often combine high loss density with a limited mounting area. The cooling plate therefore needs a carefully reviewed base thickness, internal flow path, mounting-hole pattern and thermal-interface surface. Reviewing these details together helps avoid a design that performs in a simulation but is difficult to machine, clean or leak-test.
| Part number | HIQ-CP-IGBT-425 |
|---|---|
| Reference envelope | 425 x 357 x 39 mm |
| Reference sample mass | 4.7 kg |
| Reference temperature range | -40 C to 150 C |
| Cooling method | Closed-loop liquid cooling |
| Orientation | Vertical reference layout |
| Body material route | Aluminum, grade and temper confirmed for the project |
| Secondary operations | CNC machining, drilling, port preparation and finish |
| Customization | Outline, channels, ports, mounting holes and finish |
| Acceptance | Drawing-based dimensional, surface and leak-test plan |
The dimensions, mass and temperature range shown here come from the supplied reference sample and are useful for an initial layout review. HIQ confirms the final drawing, aluminum alloy, joining route, port specification and test requirements before production.
A successful cooling plate must do more than provide a large metal area. The following points should be resolved before tooling and sample approval:
These questions help distinguish a visually similar plate from one that can be assembled and validated predictably. Where the application already has a working design, send the drawing, test history and known failure points so the review can focus on the interfaces that need improvement.
The production route combines thermal-path review, aluminum profile or plate selection, CNC machining, coolant-circuit preparation, surface finishing and inspection. The sequence is planned around the finished interface rather than around one manufacturing process.
Typical applications include traction inverters, motor drives, charging equipment, industrial power stacks and high-current switching assemblies. The reference layout can be adapted for single-module or multi-module mounting, provided the heat load, flow distribution and allowed pressure drop are defined.
The reference enclosure is intentionally adaptable. A buyer can use it as a starting point for a new housing, a replacement plate or a family of related products. Final performance must still be established with the actual module, coolant loop and mounting condition; published outline dimensions alone cannot guarantee a system temperature.
For IGBT projects, the most useful inspection plan connects dimensional capability with thermal-interface quality. Flatness and surface condition affect contact; port position affects hose assembly; internal cleanliness and leak testing protect the power electronics. Acceptance methods should be written into the approved drawing and process specification rather than inferred from a product photo.
For material and process context, review the Aluminum Association and ASTM International. Use the approved project drawing and test plan for final acceptance.
Review the liquid-cooled heat sink range, compare the IGBT water-cooled heat sink plates, or send the module drawing to HIQ Aluminum for a technical review.
Yes. Send the module footprint, heat load, coolant flow, pressure-drop limit and port orientation so the channel route and machining access can be reviewed together.
The supplied reference is approximately 425 x 357 x 39 mm with a 4.7 kg sample mass. Final size, mass and connector arrangement depend on the approved drawing.
The test medium, pressure, hold time and acceptance limit can be included in the project specification and quotation review.